SNOWJOE Sunjoe SPX4500-RM, Operator'S Manual

Page: 9 / 20

9
5. Fix the assembly with the thumb screw, washer, and nut
as shown. Tighten to secure (Fig. 4).
6. On the back right side of the upper handle frame, place
the trigger gun holder and align the holes (Fig. 5). Fix with
the other set of thumb screw, washer and nut (Fig. 6).
7. Slide the upper handle frame assembly into lower handle
frame assembly, then depress the small buttons at the
ends of the lower handle frame, push and insert into upper
handle until it snaps securely into place (Fig. 7).
8. Fit the stainless steel lance into the trigger gun and rotate
the collar until the two parts are completely locked (Fig. 8).
9. Connect the high-pressure hose to the trigger gun (Fig. 9).
10. Connect the other end of high-pressure hose to the water
outlet on the washer (Fig. 10).
Fig. 4
Washer
Thumb screw
Nut
Fig. 5
Trigger gun
holder
Fig. 6
Nut Thumb
screw
Washer
Lower handle
frame assembly
Fig. 7
Upper
handle
frame
assembly
Fig. 8
Spray lance
Collar
Trigger gun
High-pressure hose
Trigger gun
Fig. 9