SNOWJOE Sunjoe SPX4003, Operator'S Manual

Page: 9 / 20

9
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
9. Connect the garden hose adapter (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adapter
(Figs. 9 – 10). The garden hose must have an
internal diameter of at least 13 mm (1/2 in.) and must be
reinforced. The water supply must be at least equal to the
washer delivery capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
10. Attach garden hose to water supply (Fig. 11).
m
WARNING!
Do not connect to potable water system.
m
WARNING!
If connection is made to a potable water
system, the system shall be protected against backflow.
m
WARNING!
The intake water temperature must
not exceed 104ºF/40ºC. The water supply must not
exceed 0.7 MPa.
m
CAUTION!
The washer must only be used with clean
water; use of unfiltered water containing corrosive chemicals
will damage the washer.
11. Make sure the ON/OFF switch (pressure select dial) is set
in the STOP (0) position before plugging the unit into the
power outlet (Fig. 12).
This end to the
water inlet on
the unit
Garden hose
(male end)
Fig. 9
Water inlet
(female coupler)
(FRONT)
Garden hose adapter
(female coupler)
Fig. 10
Garden hose adapter
(female coupler)
(FRONT)
Garden hose
Fig. 11
Connect to water supply
Garden hose
STOP
LOW
0
HIGH
Fig. 12