SNOWJOE Sunjoe SPX4003, Operator'S Manual

Page: 7 / 20

7
Unpacking
Carton Contents
• Upper handle frame
• Lower pressure washer assembly
• Trigger gun
• Adjustable spray wand
•
Trigger gun holder
• High-pressure hose
• High-pressure hose holder
• Screw (x3)
• Trigger
gun holder
• Nut + bolt
• Garden hose adapter (female coupler)
• Needle clean-out tool
•
Manuals with registration card
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
1. Position the washer as CLOSE as possible to the
water supply.
2. The washer must be used on a secure and stable surface
in a standing, upright position (Fig. 1).
3. Connect high pressure hose holder to upper handle frame
using 3 screws provided, as shown (Fig. 2).
4. Connect trigger gun holder to upper handle frame using
supplied nut and bolt, as shown. Tighten securely (Fig. 3).
Fig. 1
Fig. 2
High pressure
hose holder
Upper
handle
frame
Screws
Fig. 3
Trigger gun holder
Upper handle frame
Nut
Bolt