background image

14

2.  Clean the nozzle with the needle clean-out tool provided 

(Fig. 23). Remove the spray wand from the gun; remove 

any dirt from the nozzle hole and rinse.

3.  Remove additional debris by back flushing water through 

the nozzle and spray wand. To do this, place the end of 

your garden hose (with water running) to the tip of the 

nozzle, pushing water and debris out of the back opening 

of the nozzle and spray wand.

Disposal

Recycling the Washer

•  Do not dispose of electrical appliances as unsorted 

municipal waste. Use separate collection facilities.

•  Contact your local government agency for information 

regarding the collection systems available.

•  If electrical appliances are disposed of in landfills 

or dumps, hazardous substances can leak into the 

groundwater and get into the food chain, damaging your 

health and well-being.

•  When replacing old appliances with new ones, the retailer 

is legally obligated to take back your old appliance for 

disposal at least free of charge.

S Support

If your Sun Joe

®

 SPX4003-RM electric pressure washer requires 

service or maintenance, please call the Snow Joe

®

 + Sun Joe

®

 

customer service center at 1-866-SNOWJOE (1-866-766-9563).

Model + Serial Numbers 

When contacting the company, reordering parts, or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

Fig. 21

(FRONT)

Garden hose 

adaptor

Adapter filter

Fig. 22

Adapter filter

Fig. 23

Needle clean-out tool

Record the following numbers from the housing or handle of your  

new product:

S   P   X   4    0   0   3   -    R  M

Model #:

Serial #:

Summary of Contents for SUNJOE SPX4003-RM





















Reviews: