8
5 Slide the upper handle frame into lower handle then
depress the small button at the end of the upper handle
frame, push and insert into lower handle until it snaps
securely into place (Fig. 4).
6. Connect the high-pressure hose to the water outlet on the
washer (Fig. 5).
7. Fit the spray wand into the trigger gun and rotate it until
the two parts are completely locked (Fig. 6).
8. Connect the high-pressure hose to the trigger gun
(Fig. 7).
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
9. Connect the garden hose adapter (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adapter
(Figs. 8 – 9). The garden hose must have an
internal diameter of at least 13 mm (1/2 in.) and must be
reinforced. The water supply must be at least equal to the
washer delivery capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
Fig. 4
Upper
handle frame
Lower
handle frame
Push
button
Fig. 5
High-pressure
water outlet
(REAR)
High-pressure hose
Fig. 6
Trigger gun
Spray wand
High-pressure hose
Trigger gun
Fig. 7
