6
Unpacking
Carton Contents
•
Electric pressure washer
•
Handle
•
Foam cannon holder
•
Storage bracket
•
Hose holder
•
ST4.8x20 thread forming screws (x2)
•
Spray wand
•
Trigger gun
•
Foam cannon
•
High-pressure hose
•
Garden hose adapter (female coupler)
•
Quick-Connect nozzles (0º, 25º & 40º)
•
Needle clean-out tool (included with manual packet)
•
Manual with registration card
1. Carefully remove the electric pressure washer and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the pressure washer.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations or save the packaging for long-term product
storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
Tools required: Phillips head screwdriver
1. Slide the storage bracket and hose holder down into
position on either side of the pressure washer (Fig. 1).
2. Attach the handle onto the front of the pressure washer
using the two thread forming screws (Fig. 2).
3. To connect the spray wand to the trigger gun, insert the
locking lugs on the spray wand into the end of the trigger
gun. Twist counter-clockwise to lock them together
(Fig. 3).
Fig. 1
Hose holder
Storage
bracket
Fig. 2
Handle
Thread
forming
screws
Fig. 3
Spray wand
Trigger
gun
Locking lugs
