11
2. Place the safety guard over the motor housing as shown.
Align the holes. Fix with the original 4 safety guard screws.
Tighten to secure (Fig. 7).
Installing the Storage Compartment
1. To store your grass blades easily, just simply snap the
storage compartment onto the pole of the trimmer and
edger. Be sure that the storage compartment is right side
up to prevent blades from falling out (Fig. 8).
2. The trimmer plate (or SharperBlade
™
mini trimmer blade)
can be snapped directly onto the compartment for safe
storage, when not in use. (Figs. 9 – 10).
Inst Changing SharperBlade™
mini trimmer blade
NOTE:
When you first purchase your t edger,
the blade will come separately with the machine. Refer only
to these instructions for fitting the SharperBlade
TM
(Step 3).
Should you need to replace the blade in the future, follow all
the steps in this section.
1.
Switch off the machine and remove the battery. Wait until
the machine comes to a complete stop.
2. Loosen the screw knob by screwing it counterclockwise.
Remove the screw knob to expose the worn blade and the
washer (Fig. 11).
3. Assemble the new SharperBlade
™
to the cordless grass
t edger with the washer placed in the middle
(Fig. 11)
. Fix the whole assembly with the screw knob.
Twist clockwise to secure.
Inst Changing Grass blade
NOTE:
When you first purchase your t edger,
the blade will come separately with the machine. Refer only to
the instructions for fitting the grass blade (Step 2-3). Should
you need to replace the blade in the future, follow all the steps
in this section.
Safety guard
Fig. 7
Safety guard
screws
Motor
housing
Storage
compartment
Pole
Fig. 8
Trimmer
plate
Pole
Storage
compartment
Fig. 9
SharperBlade
™
mini trimmer
blade
Storage
compartment
Pole
Fig. 10
Screw knob
Fig. 11
SharperBlade
™
Washer
