SNOWJOE SUNJOE MJ408E-RM Operator'S Manual Download

Page: 13 / 18

Blade Maintenance

IMPORTANT: The mower blade is sharp and can cause severe

personal injury if handled incorrectly. Wrap the blade or wear

protective gloves, and use extra caution when handling.

The steel blade is designed to provide a fine cut in long or

tough grass. Deterioration in the quality of cut indicates blade

wear or damage.

WARNING!

An excessively vibrating lawn mower

indicates that the blade is not properly balanced or has

become deformed from striking an object. In this case, the

blade must be repaired or replaced. Please follow the proper

maintenance procedures for blade care or call the

Snow Joe

+ Sun Joe

customer service center for assistance

at 1-866-SNOWJOE (1-866-766-9563).

Blade Replacement

WARNING!

Wear heavy duty gloves when handling the

blade.
IMPORTANT:

Only use original replacement parts specified for

this lawn mower.
You can purchase a replacement blade (Model MJ408E-74)

and other genuine replacement parts by ordering online at

snowjoe.com or, to order by phone, contact Snow Joe

Sun Joe

customer service at 1-866-SNOWJOE

(1-866-766-9563). The use of parts that do not meet the

original equipment specifications may lead to improper

performance of the lawn mower, may compromise operator

safety, and will void the manufacturer's warranty.

1. Disconnect the electrical supply to the lawn mower and

wait until the blade comes to a complete stop.

2. Turn the lawn mower on its side, put a block of wood

between the blade and the mower deck to prevent the

blade from turning. Loosen the blade nut by a 15 mm

wrench or socket (Fig. 16).

3. Remove the blade nut, washer, blade insulator, and the

blade (Fig. 17).

4. Make sure the rotor assembly is pushed completely

against the motor shaft. Place the new blade against the

rotor assembly. Make sure the new blade is installed with

the curved ends pointing up towards the mower deck, and

replace the blade insulation, the blade washer, and the

blade nut (Fig. 18).

NOTE: Make sure all parts are placed in the exact order same

with when they removed.

Fig. 16

Wood block

Wrench

Blade nut

Blade

Fig. 17

Blade

insulation

Blade

washer

Blade nut

Fig. 18

Rotor assembly

Motor shaft

Summary of Contents for SUNJOE MJ408E-RM



















Search results

Summary of Contents for SUNJOE MJ408E-RM

Reviews:

Related manuals for SUNJOE MJ408E-RM

Brands by name

Popular brands

SNOWJOE SUNJOE MJ408E-RM, Operator'S Manual

Search results

Summary of Contents for SUNJOE MJ408E-RM

Reviews:

Related manuals for SUNJOE MJ408E-RM

Brands by name

Popular brands