SNOWJOE SunJoe MJ24C-14-XR, Operator'S Manual

Page: 8 / 23

8
Unpacking
Carton Contents
• Cordless lawn mower
• Grass collection bag
• Grass collection bag support rod
• Upper handle frame
• Upper handle knob, washer and bolt (2)
• Lower handle frame
• Lower handle screws (2)
• Spanner
• Cable clips (2)
• 24 V 5.0 Ah Ecosharp
®
lithium-ion battery
• 24 V lithium-ion quick charger
• Manuals with registration card
1. Carefully remove the lawn mower and check to see that all
of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping.
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless lawn
mower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
Do not insert the safety key until assembly
is complete. Failure to comply could result in accidental
starting and serious personal injury.
m
WARNING!
Before performing any maintenance, make
sure the key is removed from the unit. Failure to heed this
warning could result in serious personal injury.
m
WARNING!
The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
NOTE: Before using the mower, follow these instructions to
assemble the handle and grass bag.
Handle Assembly
1. Fit the lower handle frame into the two holes in the
machine body and fasten the handle on both sides with
the screws provided (Fig. 1).
2. Join the upper handle frame to the lower handle frame
using the knob, washer and bolt provided (Fig. 2). Repeat
on the opposite side.
NOTE: The upper handle is equipped with two sets of
holes on each side of the frame, however, only one set is
necessary to secure to the lower handle (Fig. 3). Simply
select your preferred height, and secure as shown (Fig. 2).
Fig. 1
Machine body
Screw
Lower handle
frame
Fig. 2
Upper handle
Washer
Knob
Bolt