background image

12

2.  Connect the upper handle frame + middle handle frame 

to the lower handle frame by the other 2 sets of handle 

knobs + bolts, as shown (Fig. 9). 

 NOTE: 

Make sure that the handle knobs are placed inside 

the handle frame. Otherwise they will affect the wheel 

adjustment system.  

3.  Clip on the cable clips to secure the cable.  

Operation

Intended Use

The 24V-X2-TLR14-CT-RM cordless cultivator is 

designed for small gardens and flower beds, this cordless 

cultivator effectively loosens and turns over new soil. It 

may also be used to mix coarse soil with fertilizer, peat, and 

compost. This product may not be used to till extremely dry or 

wet soil.
The use of this product in rain or wet conditions is prohibited.
For safety reasons, it is essential to read the entire instruction 

manual before first use and to observe all the instructions 

contained within this manual.
This product is intended for private domestic use only. It is not 

intended for any commercial trade use. It must not be used for 

any purposes other than those described.

Wheel Adjustment

m

WARNING!

 Always switch the product off and remove 

the batteries before making any adjustments.

1. 

The wheels can be adjusted to 3 different positions for 

better cultivating results (Fig. 10).

2.  To adjust the wheel position, push the wheel adjustment 

knob while moving it to the slot for desired position; let go 

of the knob and make sure it locks into position (Fig. 11).

Starting the Machine

m

WARNING!

 Rotating blades may cause serious injury. 

The blades will continue to turn for a few seconds after the 

tool has been switched OFF. Do not touch the rotating blades. 

Contact with hot components (i.e. motor housing, gear box, 

etc.) on the machine may cause burns. Allow the machine to 

cool before handling.

Fig. 9

Handle knob 

+ bolt

Lower 

handle frame

Fig. 10

Transport  

position

Work 

position 01

Work

position 02

Fig. 11

Wheel 

adjustment knob

Work 

position 02

Work 

position 01

Transport 

position

In order to operate this cordless cultivator you will 

need two batteries and one charger from the iON+ 24V 

System. See page 17 for battery and charger options and 

specifications, or for more information visit sunjoe.com.

TOOL ONLY

B CHARGER SOLD SEPARATELY

Summary of Contents for Sunjoe 24V-X2-TLR14-CT-RM





















Reviews: