SNOWJOE Sunjoe 24V-X2-JB500-CT-RM, Operator'S Manual, Page: 3 / 16

3
14. Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
15. Do not modify or attempt to repair the appliance or the
battery packs (as applicable) except as indicated in the
instructions for use and care.
m
WARNING!
Do not modify or attempt to repair the
appliance or the battery packs (as applicable) except as
indicated in the instructions for use and care.
16. Moving parts – Keep hands and feet away from moving
parts. Keep guards in place and in proper working order.
17. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it is designed.
18. Wear personal protective equipment – When using this
tool, wear safety glasses with side shields or goggles to
provide necessary eye protection. Wear ear defenders to
prevent hearing damage. Use a face or dust mask if the
work environment is dusty.
19. Remove the batteries – Remove the batteries when
the tool is not in use, before servicing it, when changing
accessories, and when performing any other maintenance
task.
20. Store idle tool indoors – When not in use, the blower
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
21. Use the right tool – Do not use the tool for any job except
that for which it is intended.
22. Avoid dangerous environments – Do not use the blower
in rain, damp, or wet locations.
23. Stay alert – Watch what you are doing. Use common
sense. Do not operate the blower when you are tired or
under the influence of drugs, alcohol , or other medication.
Additional Safety Instructions
• Do not use the blower in the rain or in a damp area.
• Use extra care when cleaning on stairs or steps.
• Keep firm footing and maintain good balance at all times. Do
not overreach. Overreaching can result in loss of balance.
• Do not use the tool if the power button does not turn it ON
or OFF. Any tool that cannot be controlled with the ON/OFF
button is dangerous and must be repaired.
• Carefully inspect your appliance prior to use and follow all
label and marking instructions.
• Keep all parts of your body away from any moving parts
and all hot surfaces of the unit.
• Do not put any object into the tool's openings. Do not use
the tool with any opening blocked; keep openings free of
dust, lint, hair, or any other object that may reduce air flow.
• Check the work area before each use. Remove all objects
such as rocks, broken glass, nails, wire, or string, which can
be thrown or become entangled in the machine.
• Service on the product must be performed by qualified
repair personnel only. Service or maintenance performed
by unqualified personnel could result in injury to the user or
damage to the product.
• This blower is intended for residential use only.
Commercial use of this product is prohibited and will void
the manufacturer's warranty.
• Never run the unit without the proper equipment attached.
Always ensure the blower tube is properly installed.
• Always grasp the handle when operating the unit, only
operate the machine in its intended orientation.
Specific Safety Rules For
Jet Blowers
• The jet blower has been designed to clear light debris and
leaves from hard surfaces – not for clearing grassed areas.
• When operating the unit, never point the jet blower nozzle
in the direction of people or pets or in the direction of
windows. Use extra caution when blowing debris near solid
objects, such as trees, automobiles, and walls.
• Be sure to secure the unit when transporting it.
• Never douse or squirt the unit with water or any other liquid.
Clean the unit after each use as described in the cleaning
and storage section.
Battery & Charger
Safety Instructions
NOTE: This unit is the tool only. The battery and the charger
are not included. They must be purchased separately.
Model 24V-X2-JB500-CT-RM is compatible with the iON+
24V System batteries and chargers. See page 14 for more
information.
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery packs can cause cell damage.
IMPORTANT!
Analyses confirm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for personal and/or product damage.
m
WARNING!
Use only approved replacement batteries;
other batteries may damage the jet blower and cause it to
malfunction.