SNOWJOE Sunjoe 24V-X2-JB500-CT-RM, Operator'S Manual, Page: 10 / 16

10
IMPORTANT! Never allow the battery packs to become
fully discharged as this will cause irreversible damage to
the batteries.
6. When charging is complete, remove the batteries from the
charger by pulling the push lock button and sliding the
batteries backward to unlock it from the charger.
Assembly
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Do not insert batteries until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
m
WARNING!
Before performing any maintenance,
make sure batteries are removed. Failure to heed this warning
could result in serious personal injury.
m
WARNING!
To prevent serious personal injury,
make sure the ON/OFF button is in the OFF (0) position,
the batteries are removed and the impeller has come to a
complete stop before attaching the tube.
Attaching the Jet Blower Tube
1. Align the slot on the blower tube with the notch on the
cordless jet blower body. Slide the two together (Fig. 5).
2. Twist the blower tube clockwise until the notch clicks into
the end of the slot (Fig. 6).
3. Then, align the notch on the blower tube with the slot on
the blower nozzle. Slide the pieces together until they click
in place (Fig. 7).
m
WARNING!
To avoid the risk of injury, it is not
recommended to disassemble the blower tube.
In order to operate this cordless turbine jet blower you will
need an iON+ 24V System battery and charger. See page
14 for battery and charger options and specifications, or for
more information visit sunjoe.com.
TOOL ONLY
B CHARGER SOLD SEPARATELY
Operation
St Stopping
m
CAUTION!
Starting, stopping, and restarting a DC
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless j et blower , always wait at least five seconds after
stopping before restarting the jet blower .
1. Insert the batteries in the battery compartments (Fig. 8).
Fig. 5
Blower tube
Cordless jet
blower body
Slot
Notch
Fig. 6
Slot
Notch
Locked
position
Fig. 7
Blower nozzle
Blower tube
Slot
Notch
Fig. 8
Battery
packs
Battery
Compartment
Push lock
button