background image

5

•  Do not overreach or extend arms above shoulder height.
•  Keep solid footing and balance at all times.
•  Never try cutting through two branches at the same time. 

Only cut one at a time.

•  Do not bury the guide bar nose or try to cut by boring the 

guide bar nose into the wood.

•  Watch for shifting of wood or other forces that may pinch 

the chain.

•  Use extreme caution when re-entering a previous cut.
•  Use the low-kickback chain and guide bar supplied with 

this pole chain saw. Only use genuine Snow Joe

®

 +  

Sun Joe

®

 replacement parts designed specifically for use 

with this pole chain saw.

•  Never use a dull or loose chain. Keep the chain sharp and 

properly tensioned.

Battery & Charger  

Safety Instructions

We pay a great deal of attention to the design of every battery 

pack to ensure that we supply you with batteries that are safe, 

durable and have a high energy density. The battery cells have 

a wide range of safety devices. Each individual cell is initially 

formatted and its electrical characteristic curves are recorded. 

This data is then used exclusively to be able to assemble the 

best possible battery packs.
Despite all the safety precautions, caution must always be 

exercised when handling batteries. The following points must 

be obeyed at all times to ensure safe use. Safe use can only 

be guaranteed if undamaged cells are used. Incorrect handling 

of the battery pack can cause cell damage.
IMPORTANT!

 Analyses confirm that incorrect use and poor 

care of high-performance batteries are the main factors 

responsible for personal and/or product damage.

m

WARNING!

 Use only approved replacement batteries; 

other batteries may damage the power tool and cause it to 

malfunction, which can lead to serious personal injury.

m

WARNING!

 Do not use a battery pack or appliance that 

is damaged or modified. Damaged or modified batteries may 

exhibit unpredictable behavior resulting in fire, explosion or risk 

of injury.
Do not modify or attempt to repair the appliance or the battery 

pack except as indicated in the instructions for use and care.

Have your battery pack serviced by a qualified repair person 

using only identical replacement parts. This will ensure that the 

safety of the battery pack is maintained.

m

CAUTION!

 To reduce the risk of injury, charge the

Sun Joe

®

 24V lithium-ion battery pack only in its designated

Sun Joe

®

 lithium-ion charger. Other types of chargers present 

risk of fire, personal injury and damage. Do not wire a battery 

pack to a power supply plug or car cigarette lighter. Such 

misuse will permanently disable or damage the battery pack.

• 

Avoid dangerous environments – Do not charge the 

battery pack in rain, snow or in damp or wet locations. 

Do not use the battery pack or charger in the presence of 

explosive atmospheres (gaseous fumes, dust or flammable 

materials) because sparks may be generated when inserting 

or removing the battery pack, which could lead to a fire.

• 

Charge in a well-ventilated area – Do not block the 

charger vents. Keep them clear to allow for proper 

ventilation. Do not allow smoking or open flames near a 

charging battery pack. Vented gases may explode.

  NOTE: The safe temperature range for the battery is 41°F – 

105ºF (5°C – 40.5°C). Do not charge the battery outside in 

freezing weather; charge it at room temperature. 

• 

Maintain charger cord – When unplugging the charger, pull 

the plug, not the cord, from the receptacle to reduce the 

risk of damage to the electrical plug and cord. Never carry 

the charger by its cord or yank it by the cord to disconnect 

it from the receptacle. Keep the cord away from heat, oil 

and sharp edges. Make sure the cord will not be stepped 

on, tripped over or subjected to damage or stress when the 

charger is in use. Do not use the charger with a damaged 

cord or plug. Replace a damaged charger immediately.

• 

Do not use an extension cord unless it is absolutely 

necessary – Using the wrong, damaged or improperly 

wired extension cord poses a risk of fire and electric shock. 

If an extension cord must be used, plug the charger into a 

properly wired 16 gauge or larger extension cord with the 

female plug matching the male plug on the charger. Make 

sure that the extension cord is in good electrical condition.

• 

Charger (XZ2600-0450) is rated for 100 – 240 volt AC 

only – The charger must be plugged into an appropriate 

receptacle.

• 

Use only recommended attachments – Use of an 

attachment not recommended or sold by the battery 

charger or battery pack manufacturer may result in risk of 

fire, electric shock or personal injury.

• 

Unplug charger when not in use – Make sure to remove 

battery pack from unplugged charger.

m

WARNING!

 To reduce the risk of electric shock, 

always unplug the charger before performing any cleaning 

or maintenance. Do not allow water to flow into the charger. 

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock 

hazards.

• 

Do not burn or incinerate battery pack – Battery pack 

may explode, causing personal injury or damage. Toxic 

fumes and materials are created when battery packs are 

burned.

• 

Do not crush, drop or damage battery pack – Do not use 

the battery pack or charger if they have sustained a sharp 

blow, been dropped, run over or have been damaged in any 

way (i.e. pierced with a nail, hit with a hammer, stepped on, 

etc.).

• 

Do not disassemble – Incorrect reassembly may pose 

a serious risk of electric shock, fire or exposure to toxic 

Summary of Contents for Sunjoe 24V-PS10-LTE-RM

























Reviews: