11
2.
To select reverse rotation, press the reverse selector
switch in the opposite direction (Fig. 12).
3.
The center position locks the tool (Fig. 13).
NOTE:
The drill/driver will not run unless the direction of
rotation selector is pushed fully to the left or right.
m
CAUTION!
To prevent gear damage, always allow
the chuck to come to a complete stop before changing the
direction of rotation.
m
WARNING!
Battery tools are always in operating
condition. Lock the switch when not in use or carrying at your
side, when installing or removing the battery pack, and when
installing or removing bits.
St Stopping
The variable speed trigger switch delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
1. Set the direction of rotation selector in the OFF
(center lock) position to lock the switch trigger (Fig. 13).
2. Insert the battery in the battery compartment (Fig. 14).
3.
To turn the drill ON, unlock and depress the trigger switch
(Fig. 15).
4.
To turn it OFF, release the trigger switch and allow the
chuck to come to a complete stop (Fig. 15).
NOTE: A whistling or ringing noise coming from the switch
during use is a normal part of the switch function.
NOTE: Running at low speeds under constant usage may
cause the drill to become overheated. If this occurs, cool the
drill by running it without a load and at full speed.
Speed Settings
1.
Select low speed (1) for applications requiring higher
power and torque, such as driving screws and drilling in
metal (Fig. 16).
Fig. 12
Reverse rotation selector
Fig. 13
Direction of
rotation selector
Forward
Reverse
Lock
Center
"LOCK"
position
Fig. 14
Battery
compartment
Battery
Fig. 15
Trigger switch
