background image

4

10. Recharge only with the charger specified by the 

manufacturer. A charger that is suitable for one type of 

battery pack may create a risk of fire when used with 

another battery pack.

11. Use appliances only with specifically designated battery 

packs. Use of any other battery packs may create a risk of 

injury and fire.

12. Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally occurs, 

flush with water. If liquid contacts eyes, additionally seek 

medical help. Liquid ejected from the battery may cause 

irritation or burns.

13. Do not use a battery pack or appliance that is damaged 

or modified. Damaged or modified batteries may exhibit 

unpredictable behavior resulting in fire, explosion or risk of 

injury.

14. Do not expose a battery pack or appliance to fire or 

excessive temperature. Exposure to fire or temperature 

above 266ºF (130°C) may cause explosion.

15. Follow all charging instructions and do not charge the 

battery pack or appliance outside of the temperature 

range specified in the instructions. Charging improperly 

or at temperatures outside of the specified range may 

damage the battery and increase the risk of fire.

Information about the charger and the 

charging process

1.  Please check the data marked on the rating plate of the 

battery charger. Be sure to connect the battery charger 

to a power supply with the voltage marked on the rating 

plate. Never connect it to a different mains voltage.

2.  Protect the battery charger and its cord from damage. 

Keep the charger and its cord away from heat, oil and 

sharp edges. Have damaged cords repaired without delay 

by a qualified technician at an authorized Snow Joe

®

 +  

Sun Joe

®

 dealer or call the Snow Joe

®

 + Sun Joe

®

 

customer service center at 1-866-SNOWJOE  

(1-866-766-9563).

3.  Electrical plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs with 

grounded appliances. Unmodified plugs and matching 

outlets will reduce the risk of electric shock.

4.  Keep the battery charger, battery pack(s) and the cordless 

tool out of the reach of children.

5.  Do not use the supplied battery charger to charge other 

cordless tools.

6.  During periods of heavy use, the battery pack will become 

warm. Allow the battery pack to cool to room temperature 

before inserting it into the charger to recharge.

7.  Do not overcharge batteries. Do not exceed the maximum 

charging times. These charging times only apply to 

discharged batteries. Frequent insertion of a charged or 

partially charged battery pack will result in overcharging 

and cell damage. Do not leave batteries in the charger for 

days on end.

8.  Never use or charge batteries if you suspect that it has 

been more than 12 months since the last time they were 

charged. There is a high probability that the battery pack 

has already suffered dangerous damage (exhaustive 

discharge).

9.  Charging batteries at a temperature below 41°F (5°C) will 

cause chemical damage to the cells and may cause a fire.

10. Do not use batteries that have been exposed to heat 

during the charging process, as the battery cells may have 

suffered dangerous damage. 

11. Do not use batteries that have suffered curvature or 

deformation during the charging process or those that 

exhibit other atypical symptoms (gassing, hissing, 

cracking, etc.).

12. Never fully discharge the battery pack (maximum 

recommended depth of discharge is 80%). A complete 

discharge of the battery pack will lead to premature aging 

of the battery cells.

Protection from environmental influences

1.  Wear suitable work clothes. Wear safety goggles.
2.  Protect your cordless tool and the battery charger from 

moisture and rain. Moisture and rain can cause dangerous 

cell damage.

3.  Do not use the cordless tool or the battery charger near 

vapors and flammable liquids.

4.  Use the battery charger and cordless tools only in dry 

conditions and at an ambient temperature of 41ºF – 105°F 

(5°C – 40.5°C).

5.  Do not keep the battery charger in places where the 

temperature is liable to reach over 105°F (40.5°C).  

In particular, do not leave the battery charger in a car that 

is parked in the sunshine.

6.  Protect batteries from overheating. Overloads, 

overcharging and exposure to direct sunlight will result 

in overheating and cell damage. Never charge or work 

with batteries that have been overheated – replace them 

immediately, if possible.

7.  Store the charger and your cordless tool only in dry 

locations with an ambient temperature of 41ºF – 105°F 

(5°C – 40.5°C). Store your lithium-ion battery pack in a 

cool, dry place at a temperature of 77°F (25°C). Protect 

the battery pack, charger and cordless tool from humidity 

and direct sunlight. Only place fully charged batteries in 

storage.

8.  Prevent the lithium-ion battery pack from freezing.  

Battery packs that were stored below 32°F (0°C) for more 

than 60 minutes must be discarded.

9.  When handling batteries, be wary of electrostatic charge. 

Electrostatic discharges can damage the electronic 

protection system and the battery cells. Avoid electrostatic 

charging and never touch the battery poles.

Summary of Contents for Sunjoe 24V-DD-CT-RM





















Reviews: