SNOWJOE SUNJOE 24V-CTC-LTE Operator'S Manual Download Page 1

A Division of Snow Joe, LLC

Model 24V-CTC-LTE

Form No. SJ-24V-CTC-LTE-880E-M

R

OPERATOR’S MANUAL

24V* CORDLESS WEED SWEEPER

150 W | 1100 RPM

Original instructions. 
© 2022 Snow Joe, LLC. All rights reserved.

EN

*Initial no-load voltage, when fully charged, peaks at 24 volts; 

nominal voltage under typical load is 21.6 volts.

SAVE THESE INSTRUCTIONS

1

IMPORTANT!

Safety Instructions
All Operators Must Read These 
Instructions Before Use

Always follow these safety guidelines. Failure to do so may result 
in serious bodily injury or death.

General Safety

m

WARNING! 

This power tool is not intended for use 

by children or by unassisted, unsupervised persons whose 
physical, sensory or mental capabilities prevent them from using 
it safely. Children should be supervised to ensure that they do 
not play with the appliance.

Before starting up your power tool, please check it carefully 
for any defects. If you find any, do not start up your machine. 
Contact your authorized Snow Joe

®

 + Sun Joe

®

 dealer or 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

m

WARNING!

 When using the power tool, basic safety 

precautions should always be followed to reduce the risk of fire, 
electric shock, and personal injury. These include:

1.  Keep work area clean and well-lit – 

Cluttered, dark areas 

invite accidents. Always inspect the area where the weed 
sweeper is to be used. Remove all objects (i.e. stones, 
sticks, and other foreign materials) that could be thrown by 
the brush or cause the operator to trip.

2.  Replacement parts – 

Inspect the weed sweeper for worn, 

missing, or damaged parts. When servicing this unit, 
use only identical replacement parts. Replace or repair 
damaged parts immediately.

3.  Keep children, bystanders, and pets away – 

 

All spectators, including pets, should be kept a safe 
distance away from the work area. Never leave the machine 
running when unattended.

4.  Know your product – 

Know how to start and stop the 

machine. Be thoroughly familiar with the controls and 
ensure they are functioning properly.

5.  Use the right tool – 

Do not use this machine for any job 

except that for which it was intended.

6.  Transporting – 

Allow the brush to completely stop rotating 

before transporting the unit. Do not carry the cordless weed 
sweeper with your finger on the trigger. 

m

CAUTION! 

Moving parts will continue to run for several 

seconds after turning off the machine.

7.  Moving parts – 

Keep hands and feet away from moving 

parts. Keep guards in place and in proper working order.

8.  Do not force the tool – 

It will perform better with less 

likelihood of personal or mechanical injury if it is used at 
the rate for which it was designed.

9.  Do not run –

 Never run while operating the tool.

10.  Use two hands – 

Keep a firm grip on both handles to avoid 

loss of control.

11.  Foreign object – 

Look for hidden obstacles or hazards. If 

the cordless weed sweeper strikes a foreign object, follow 
these steps:

• Stop the weed sweeper.

• Inspect for damage.

• Repair any damage before restarting the tool.

12.  Dress properly – 

Do not wear loose clothing or jewelry as 

such articles can become caught in moving parts. Wear 
protective rubber gloves, hearing protection and protective 
covering to contain long hair.

13.  Avoid slipping – 

Maintain proper footing and balance at all 

times to avoid slipping or falling. Wear protective non-slip 
footwear that will protect your feet and improve your footing 
on slippery surfaces. Exercise caution when changing 
direction and operating the tool on slopes.

14.  Use safety glasses – 

Thrown objects can cause serious 

injury to the eyes. Always wear safety glasses or eye 
shields during operation and while making any adjustments 
or repairs.

15.  Remove the battery – 

Stop the weed sweeper and remove 

the battery when it is not in use, before servicing it, when 
changing accessories, and when performing any other 
maintenance. Wait until the brush has come to a complete 
stop and the housing has cooled down.

16.  Store indoors – 

When not in use, the cordless weed 

sweeper should be stored indoors in a dry and high or 
locked-up place out of the reach of children.

17.  Maintain the cordless weed sweeper with care –  

Keep the brushes clean for optimal performance and to 
reduce the risk of injury. Keep the handles dry, clean, 
and free from oil and grease. Follow the additional 
recommendations described in the maintenance section of 
this manual.

Summary of Contents for SUNJOE 24V-CTC-LTE














































Reviews: