background image

13

m

WARNING! 

Do not cut trees near electrical wires.

m

WARNING! 

Failure to lubricate the chain will cause 

damage to the bar and chain. Use only a good quality bar 

 

and chain oil designed specifically for use with chain saws. 

NOTE: It is normal for oil to seep from the saw when not in 

use. To prevent seepage, empty the oil tank after each use. 

When storing the unit for a long period of time (3 months or 

longer), be sure the chain is lightly lubricated; this will prevent 

rust on the chain and bar sprocket.

1.  Prior to each cutting session, run through the daily 

checklist (see ƒ. 20).

2.  In the event of an accidental activation, the front hand 

brake will engage in the ON position to stop the machine. 

Reset the safety brake function by returning the front hand 

brake to the OFF position (Fig. 6). 

3.  Insert the battery in the battery compartment. Push to 

make sure it is locked in place (Fig. 7).

4. 

To turn the tool on, hold the chain saw firmly with both 

hands on the handles. Slide the safety lock switch toward 

you, then squeeze the trigger switch. When the chain saw 

is running, you can release the safety lock switch (Fig. 8). 

5. 

To turn the tool off, simply release the trigger switch. 

  NOTE: Do not squeeze the trigger switch until you are 

ready to make a cut.

Operating Tips

m

WARNING! 

For your safety and that of others:

1.  Do not use the machine without reading the instructions 

carefully. Become acquainted with the controls and 

the proper use of the machine. Learn how to stop the 

machine quickly.

2.  Keep in mind that the operator or user is responsible  

for accidents or hazards occurring to other people or  

their property.

3.  Always wear suitable clothing when using the machine. 

Wear anti-vibration gloves and other personal  

protective equipment.

  All the above-mentioned precautions do not, however, 

guarantee the prevention of certain risks – i.e. Raynaud’s 

phenomenon or Carpal tunnel syndrome. For operators 

who use this machine for prolonged periods, it is 

therefore recommended to have periodic checkups on 

their hands and fingers. If any of the above mentioned 

symptoms should appear, please contact a physician 

immediately.

4. 

Work only in daylight or good artificial light.

5.  Take utmost care when working near metal fences.
6.  Take care not to hit the bar hard against foreign objects or 

flying debris caused by the movement of the chain.

7.  Stop the motor and remove the battery from  

the compartment:

  Whenever you leave the machine unattended; 

  Before cleaning, checking or servicing the machine;

  After striking a foreign object. Inspect the machine  

 

for any damage and make repairs before restarting  

 

it again;

  If the machine begins to vibrate abnormally,  

 

immediately look for the cause of the vibrations  

 

and have the machine inspected at an authorized  

 

Snow Joe

®

 + Sun Joe

®

 dealer or call the Snow Joe

®

  

 

+ Sun Joe

®

 customer service center at  

 

1-866-SNOWJOE (1-866-766-9563) for assistance;

Front hand 

brake

Fig. 6

ON position

OFF position

Battery pack

Fig. 7

Safety lock switch

Fig. 8

Trigger switch

Summary of Contents for SUNJOE 24V-10CS-RM





























Reviews: