SNOWJOE Sun Joe 24V-DRNCLN-CT, Operator'S Manual, Page: 15 / 20

15
5. Insert the new cable into the connector, align the screw
holes and tighten M3 set screws.
6. Wear protective gloves, then hand feed the new cable
back into the drum.
m
WARNING!
Do not start the tool to retract the cable,
exposed cable can lead to unpredictable personal injury,
tool damage, damage to indoor objects, fire, electric shock
and other dangerous situations.
If the cable cannot be replaced, please call the Snow Joe
®
+
Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Cl Maintenance
m
WARNING!
Remove the battery pack before inspection
and maintenance.
m
WARNING!
Do not at any time let brake fluids,
gasoline, petroleum based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can damage,
weaken or destroy plastic which can result in serious personal
injury.
m
WARNING!
When servicing, use only identical
replacement parts. Use of any other part could create a hazard
or cause product damage.
m
WARNING!
To avoid accidents, always disconnect the
tool and/or charger from the power supply before cleaning.
Ventilation openings and switch trigger must be kept clean
and free of foreign matter. Do not attempt to clean by inserting
pointed objects through opening.
Storage
Store your cordless drain auger out of reach of children or
other untrained persons.
Drain auger can be stored in the garage, cleaning cupboard or
wherever you keep your tools and cleaning supplies.
Troubleshooting
• If the drain auger does not function, check the battery and
make sure it is charged.
• If the battery does not charge, check the charger adapter
and the charger adapter cable are connected correctly.
Remove the battery pack and allow it to cool down to room
temperature.
• Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
Battery C Disposal
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
m
CAUTION!
Even discharged battery packs contain
some energy. Before disposing, use electrical tape to cover the
terminals to prevent the battery pack from shorting,
which could cause a fire or explosion.
m
WARNING!
To reduce the risk of injury or explosion,
never burn or incinerate a battery pack even if it is damaged,
dead, or completely discharged. When burned, toxic fumes
and materials are emitted into the surrounding atmosphere.
1. Batteries vary according to device. Consult your manual
for specific information.
2. Install only new batteries of the same type in your product
(where applicable).
3. Failure to insert batteries in the correct polarity,
as indicated in the battery compartment or manual,
may shorten the life of the batteries or cause batteries to
leak.
4. Do not mix old and new batteries.
5. Do not mix Alkaline, Standard (Carbon-Zinc),
or Rechargeable (Nickel Cadmium, Nickel Metal Hydride,
or Lithium-Ion) batteries.
6. Do not dispose of batteries in fire. The cell of the battery
may explode.
7. Batteries should be recycled or disposed of as per state
and local guidelines.
Fig. 21
Connector
Phillips screwdriver
Cable
M3 Screw