SNOWJOE Sun Joe 24V-DRNCLN-CT, Operator'S Manual, Page: 11 / 20

11
m
WARNING!
The chargers do not automatically turn
off when the battery is fully charged. Please take care not
to leave the battery plugged into the charger. Switch off or
unplug the charger at the mains when charging is complete.
4. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Operation
m
WARNING!
Always wear safety goggles when
operating the drain auger. Failure to do so could result in
objects being thrown into your eyes, resulting in possible
serious injury.
m
WARNING!
Do not use any attachments or accessories
not recommended by the manufacturer of this drain auger.
The use of attachments or accessories not recommended can
result in serious personal injury.
LED Light
The drain auger is equipped with a LED light to provide
additional lighting for operation in low light conditions.
The LED light will turn on when the trigger switch is pressed
(Fig. 4).
Please use a clean cloth to wipe the LED light in case of
scratching; otherwise it will reduce luminance.
Direction of Rotation Selector
m
WARNING!
Set the direction of rotation selector in the
OFF (center lock) position to lock the switch trigger and help
prevent accidental starting when not in use.
NOTE: Always check the direction of the cordless drain auger
rotation before use.
1. Press the (L) forward rotation selector to rotate the cable
clockwise (Fig. 5).
2. Press the (R) reverse rotation selector to rotate the cable
counterclockwise (Fig. 6).
3. Set the direction of rotation selector in the OFF (center
lock) position to lock the switch trigger and help prevent
accidental starting when not in use (Fig. 7).
NOTE: The tool will not run unless the direction of rotation
selector is pushed fully to the left or right.
m
WARNING!
To prevent gear damage, always allow
the cable to come to a complete stop before changing the
direction of rotation.
Fig. 4
LED light
Fig. 5
Forward
rotation
selector
Cable
L
Fig. 6
Reverse
rotation
selector
Cable
R
Fig. 7
Direction of
rotation selector
Forward
Reverse
Lock
Center
"LOCK" position