SNOWJOE SPX9009-PRO, Operator'S Manual

Page: 10 / 20

10
7. Press the ON/OFF switch on the ON(I) side to start the
pressure washer (Fig. 13).
8. When re-starting the motor, always keep the trigger
pressed.
Bypass Mode
When the machine is turned on but the trigger gun is not, the
pressure washer will enter the bypass mode with water flow
circulated inside the pump.
m
ATTENTION!
In any case, DO NOT leave the machine
in bypass mode for more than 2 minutes. Water circulation will
generate heat, which will cause damage to the pump.
Adjusting Pressure
The unit is equipped with adjustable pressure technology. Use
the adjustable pressure valve to raise or lower pressure. To
increase pressure, twist clockwise; to decrease pressure, twist
counter-clockwise (Fig. 14).
Using Nozzles
Before beginning any cleaning task, determine the best nozzle
for the job. Each of the nozzles has a different spray pattern.
The nozzle patterns are 40˚ (for gentle cleaning), 25˚ (for
all-purpose cleaning), 15˚ (for tough jobs), 0˚ (for spot cleaning
or hard-to-reach areas) and the soap nozzle (for
detergent application).
m
CAUTION!
NEVER change nozzles without locking the
safety lock on the trigger handle.
m
WARNING!
High-pressure jets can be dangerous if
subject to misuse. The jet must not be directed at persons,
pets, live electrical equipment, or the appliance itself.
This electric pressure washer is equipped with five (5) Quick-
Connect nozzles that easily snap onto the Quick-Connect
collar of the spray wand.
To connect a nozzle to the spray wand:
1. Turn off the pressure washer and shut off the water supply.
Pull the trigger to release water pressure.
2. Engage the safety lock on the trigger handle by pushing
up on the safety lock until it clicks into the slot (Fig. 15).
3. Snap the desired nozzle onto the Quick-Connect collar
until it clicks into place (Fig. 16).
To disconnect a nozzle from the spray wand once the cleaning
job is complete:
1. Turn off the pressure washer and shut off the water supply.
Pull the trigger to release water pressure.
Fig. 13
ON/OFF switch
Fig. 14
Adjustable pressure valve
Lower the pressure
Raise the
pressure
Fig. 15
Safety lock
Slot
Fig. 16
Nozzle
“Click”
Spray wand quick-
connect collar