15
To Engage Drive
1.
In the control panel, select a speed appropriate for a pace
you’re comfortable with (Fig. 21).
2.
Squeeze drive trigger against the left-handle and the snow
blower will move. Release it and drive motion will stop
(Fig. 22).
IMPORTANT!
Forward speed can be changed without
releasing the drive trigger (left-handle).
m
WARNING!
DO NOT change direction from forward
to reverse with drive trigger (left-handle) engaged.
Unit
must come to a complete stop before changing direction.
Snow Removal (Fig. 23)
NOTE:
Auger trigger should be engaged before drive trigger
when throwing snow.
1.
Press the safety button then engage auger trigger. Auger
will start spinning.
2.
In the control panel, select the appropriate speed for the
snow conditions and a pace you’re comfortable with.
3.
Engage drive trigger. The snow blower will move and start
plowing snow.
IMPORTANT!
The auger will not engage when in either
REVERSE or XPORT mode.
Stopping the Machine
1.
Release both drive trigger and auger trigger. Drive motor
and auger will stop (Fig. 24).
2.
Wait for all moving parts to come to a complete stop.
3.
Disengage safety switch.
4.
Turn power switch to OFF position and remove key.
ON
OFF
Fig. 21
Reverse
Forward
Speed 1 | Speed 2 | Speed 3
Fig. 22
Drive trigger
(Left-handle)
Fig. 23
Drive trigger
(Left-handle)
Auger trigger
(Right-handle)
Safety
button
3
Speed 1 Speed 2 Speed 3
4
1
2
Fig. 24
Drive Trigger
(Left-handle)
Auger trigger
(Right-handle)
Safety key/
Power switch
Safety switch
NOTE:
A continuous warning beep will activate to remind
operator to turn off machine if there is no operation selected
within 3 minutes. To deactivate warning, you must first turn
off and restart the machine.
