SNOWJOE iON100V-21SB-RM Operator'S Manual Download Page 11

11

NOTE: If the charge level button does not appear to be 

working, place the battery pack on the charger and charge 

 

as needed.
NOTE:

 Immediately after using the battery pack, the charge 

level button may display a lower charge than it will if checked 

a few minutes later. The battery cells “recover” some of their 

charge after resting.

USB Charging Port

The iON100V-5AMP lithium-iON battery is equipped with 2 

USB charging ports, which can provide 5 V power for most 

smart phones, tablets, wearables and other USB devices. 
To charge with the battery, connect a USB cable that came 

with your selected electronic device to one of the USB ports 

under the handle of the iON100V-5AMP battery pack and to 

your device. The charging process will start immediately 

 

(Fig. 7). 

NOTE: 

If you experience any issues with charging your 

particular device, ensure that the battery pack is fully charged. 

m

WARNING! 

Make sure the battery’s USB ports are  

not contaminated with lint or other debris. Use a canned-air 

type of product periodically to ensure that the port openings 

are clear.

LED light

The iON100V-5AMP battery is equipped with a 0.35 watt LED 

light located on the handle, which is good for camping and 

emergency illumination. To turn on the LED light, open the 

carry handle, and press the battery push button twice in a row. 

To turn off the LED light, press the battery push button twice 

again (Fig. 8). 

Charger Operation

m

WARNING! 

Charge only the iON100V-5AMP lithium-ion 

battery pack in compatible iON100V-RCH battery 

 

charger. Other types of batteries may cause personal injury 

and damage.

To reduce the risk of electric shock, do not allow water to flow 

into the charger's AC/DC plug.

When to Charge the iON100V-5AMP 

Lithium-Ion Battery

NOTE: 

The iON100V-5AMP lithium-ion battery pack does 

not develop a "memory" when charged after only a partial 

discharge. Therefore, it is not necessary to run down the 

battery pack before placing it into the charger.  

•  Use the battery charge indicator lights to determine when to 

charge your

 iON100V-5AMP lithium-ion battery packs. 

The battery is at 20% capacity 

and 

requires charging

Light Indicators

Lights

The battery is at 50% capacity 

and 

requires charging soon

The battery is at 70% capacity

The battery is at full capacity

Fig. 7

USB charging 

ports

Fig. 8

LED light

Push twice to start/stop

Summary of Contents for iON100V-21SB-RM

























Reviews: