SNOWJOE 24V-X2-SB21-CT-RM Operator'S Manual Download Page 2

2

© 2021 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

2

A Division of Snow Joe

®

, LLC

Model 24V-X2-SB21-CT-RM

Form No. SJ-24V-X2-SB21-CT-RM-880E-M-V1

OPERATOR’S MANUAL

CORDLESS SNOW BLOWER 
– TOOL ONLY

48V MAX* | 21-INCH | LED LIGHT

R

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Read all instructions when using cordless snow blowers. Basic 

safety precautions should always be followed to reduce the 

risk of fire, electric shock, and personal injury. 

General Safety Rules

Notice the personal safety alert symbol 

m

 used in this 

manual to draw your attention to a WARNING given along 

with the particular operating instruction. This means that 

the operation requires special ATTENTION, CAUTION, and 

AWARENESS.

• 

Keep work area clean and well lit –

 Cluttered, dark areas 

invite accidents.

• 

Keep bystanders away – All bystanders and pets should 

be kept a safe distance away from the work area. 

• 

Dress properly – 

Do not wear loose clothing or jewe

lry. 

They can get caught in moving parts. Protective rubber 

gloves and non-slip footwear are recommended when 

working outdoors.

• 

Use the right product – Do not use this machine for any 

job except that for which it is intended.

• 

m

CAUTION! –

 Exercise caution to avoid slipping or falling. 

Wear protective footwear that will protect your feet and 

improve your footing on slippery surfaces.

• 

Use safety glasses –

 Also use safety footwear, snug-fitting 

clothing, protective gloves, hearing and head protection. 

• 

Do not force the snow blower – Use the snow blower 

at the rate for which it was designed to ensure optimal 

performance and safe operation.

• 

Stay alert – Watch what you are doing. Use common 

sense. Do not operate the snow blower when you are tired 

or 

under the influence of alcohol or drugs.

• 

Do not overreach –

 

Keep proper footing and balance at  

all times.

• 

Store indoors –

 When not in use, the snow blower should 

be kept dry and stored out of the reach of children in a high 

or locked place.

• 

Maintain snow blower with care – Follow instructions for 

lubricating and changing accessories.

m

WARNING!

 Always disengage the switch bar lever and 

remove the battery packs before making any adjustments, 

inspecting, servicing, changing accessories, cleaning the snow 

blower, or when any other dangerous conditions are present. 

 

Any such operation should be performed after revolving parts 

inside the snow blower stop completely. Such preventive 

safety measures reduce the risk of starting the power tool 

accidentally.

m

WARNING!

 When replacing any parts, you must strictly 

observe the instructions and procedures described in this user 

manual. Special care should be paid to any rubber parts, since 

these parts may increase the motor load and decrease its 

mechanical power if damaged.

m

WARNING!

 If you notice that the snow blower is not 

running properly or hear abnormal sounds from the motor 

when it is in use, immediately stop the machine, remove the 

batteries, and contact your service center.

• 

Surfaces – This snow blower is intended for use on 

paved surfaces. Do not use on gravel, stone or other 

unpaved surfaces unless the snow blower is adjusted for 

such surfaces according to the instructions given in the 

operator’s manual.

• 

Moving parts present risks –

 Keep your face, hair, 

clothing, hands, and feet away from moving parts. 

 

All guards and safety attachments must be installed 

properly before using the unit. Shut off and disconnect the 

batteries before touching any parts other than the handles 

and switch.

• 

Avoid unintentional starting – Make sure the safety lock 

button and the switch bar lever are in the off position before 

inserting the batteries in the unit. Do not carry the snow 

blower with the safety lock button and the switch bar lever 

engaged.

• 

Do not overreach – Maintain proper footing and balance 

at all times. Place heels firmly on the ground and tightly 

grasp the handle bar. Watch for uneven surfaces and do not 

overreach. In case you fall or collide with the snow blower, 

inspect the unit for any damages or cracks. When stepping 

backwards, be careful to avoid obstacles beneath 

your feet 

or behind you to avoid falling.

• 

Wear rubber boots when operating the snow blower. 

• 

Operation of the snow blower in the hand-held position is 

unsafe, except in accordance with the special instructions 

for such use provided in the operator's manual. 

• 

Keep guards in place and in working order. 

Summary of Contents for 24V-X2-SB21-CT-RM





















Reviews: