SNOWJOE 24V-X2-20SB Operator'S Manual Download Page 17

17

S Support

If your Snow Joe

®

 24V-X2-20SB cordless snow blower requires 

service or maintenance, please call the Snow Joe

®

 +  

Sun Joe

®

 customer service center at 1-866-SNOWJOE 

 

(1-866-766-9563).

Model + Serial Numbers 

When contacting the company, reordering parts or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

Record the following numbers from the housing or handle of your  

new product:

Model #:

Serial #:

2 4 V - X 2 - 2 0 S B

24VCHRG-DPC-2

Federal Communications Commission 

(FCC)

m

WARNING!

 Any changes or modifications to this 

unit not expressly approved by the party responsible for 

compliance could void the user's authority to operate the 

equipment.

Class B device:
NOTE:

 This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 15 

of the FCC Rules. 
These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. 

This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to 

 

radio communications. 

However, there is no guarantee that interference will not occur 

in a particular installation. 

If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment 

 

and receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician 

for help.

Summary of Contents for 24V-X2-20SB





















Reviews: