Lit. No. 76454/76455/76456, Rev. 03
17
February 15, 2020
TROUBLESHOOTING GUIDE
Spreader
does not run
Control turns ON,
beeps, shuts OFF,
displays
error code
ON/OFF switch
lights no display
Nothing happens;
No display;
ON/OFF will not
light up
OL Code
E1 Code
LB Code
All other
codes
EO Code
Check input
power
Check power
source
to control
Definition:
amperage draw
too high
Definition:
Dead: Short in
motor circuit
Definition:
Bad electrical
connection
Check harness
for spliced-in
accessory
Definition:
Open circuit
between motor
and control
Bad control;
Contact distributor
Low battery; Less
than 12V output
Bad control;
Contact distributor
Jammed material
Corrosion
Break in wiring
harness; contact
distributor
Replace affected
components
Bad motor;
Contact distributor
Bad control
contact distributor
Corrosion
Bad control;
Contact distributor
Spreader
unplugged
Loose connection;
Bad ground
Bad transmission;
Contact distributor
Motor power cord
disconnected
inside drive
assembly
Load test battery
Switch off & on
for auto-reverse
function
clear jam
Replace all
corroded
connections
Replace harness
Replace all
corroded
connections
Plug in spreader
Tighten or replace
Test turn shaft by
hand; Should turn
freely
Open access
cover and plug
together
Use dielectric
grease