9
© TrynEx International 2014 (REV A) F51877
Operating Instructions
Operator Controls
SELECTING A GEAR
FREEWHEEL
ADJUSTING BRUSH SPEED
Come to a complete stop before changing gears.
The SS-4000 is equipped with a three-speed transmission. First Gear is the slowest setting and engaged by pulling the shift lever all the way
back. Third Gear is the fastest setting and is engaged by pushing the lever all the way forward. Second Gear is in the middle. You will feel the
lever lock into a detent and hear a “click.”
Gear Lever Location.
There is a freewheel mechanism on each wheel. The freewheel makes turning the machine easier. One or both wheels can be locked for
working on inclines and when clearing snow.
The freewheel is disabled by putting the linchpin through both wheel and axle, locking the two together.
When removing snow with the plow, locking the wheel on the windrow-side will reduce the lateral force on the handlebars.
Freewheel.
Locked.
Plowing.
The speed of the brushes can be increased using the lever on the right handlebar. The brush speed must only be adjusted when the brush is
switched on.
When sweeping dust, use a low brush speed.
When sweeping leaves or similar material, use a high brush speed.
When sweeping snow, use a high brush speed.
When using the Debris Collector Box, use a medium brush speed.
Remember that an increased brush speed will throw debris farther, therefore increasing the danger zone.
Freewheel
Locked