2
© TrynEx International 2014 F51558 REV-A140905
Introduction
These Installation Instructions have been designed to guide you while assembling and installing your SnowEx spreader. Follow these instruc-
tions with care to ensure performance and longevity.
Please read and understand the safety warnings associated with the assembly and installation of the spreader before beginning. In addition
the safety information in the these instructions, observe general safety guidelines to maintain your safety and the safety of those around you.
TORQUE CHART
Use this chart as a guide for tightening hardware.
Hand-tighten all fasteners until complete, then tighten to the recommended torque (unless
specified otherwise in these instructions).
TORQUE CHART FT-LB
Fastener
Recommended
Torque (ft-lb)
1/4-20
6
5/16-18
13
3/8-16
23
7/16-14
35
1/2-13
55
9/16-12
80
5/8-11
110
3/4-10
200
7/8-9
320
1-8
480
SAFETY ALERT DEFINITION
This Safety Alert Symbol is used to pinpoint characteristics that, if not carefully followed, can create a safety hazard. When you
see this symbol in this manual or on the machine itself, BE ALERT – your safety and the safety of others is involved.
An accident will occur, resulting in Serious Injury or Death if the instructions are not followed.
An accident may occur, resulting in Serious Injury, perhaps Death, if the instructions are not followed.
An accident may occur, resulting in Minor or Moderate Injury if the instructions are not followed.
Important Information; Property or Equipment Damage may result if not followed.
