SnowEx Brine PRO 2000, Manual

Page: 38 / 154

38
Achieving Salinity
•
You will need to use the supplied refractometer to measure the salinity of
the brine and calibrate the machine accordingly.
•
To ensure the brine maker is producing the intended salinity, you will need
to calibrate the conductivity sensor with the factor value adjustment.
•
Calibration should be completed on initial startup.
•
Salt quality and water quality can have an effect on the measurement of
salinity.
•
It is recommended to verify calibration of the BrinePro™ 2000 brine maker
when any of these variables change.
•
Once 23.3% salinity is reached, the fresh water will turn back on and brine
will soon start to spill over into the rear storage tank.