SnowEx Brine PRO 2000, Manual

Page: 3 / 154

Start with the Best Quality
Salt/Water Mix Available
•
Clean water: A water filter may
be needed at water intake
valve.
•
Use Sodium Chloride Only
•
Salt brine works most actively
when pavement temperature is
above 15°F
•
Store salt inside if possible
•
The purer the salt, the more
efficient the brine maker will be
and will yield better results faster.
Factor Value Adjustment
for desired Salinity
•
30 minutes or longer to
reach 23.3% salinity
•
Do not interrupt the
machine during startup
cycle
•
4” to 10” Salt build-up in
mixing tank is normal
depending on quality of
salt.
•
Start measuring salinity
15 minutes after salt flow
begins
System Maintenance
•
Keep unit clean
•
Clean eductor nozzles regularly
•
Run CIRCULATE mode
periodically to prevent excessive
salt build up in the mixing tank
•
Wash down with hose (fresh
water)
•
Drain brine from system
•
Grease all bearings every 10
hours
•
Prime circulation pump on dry
startup
Basics of Brine Making