background image

Lit. No. 86834, Rev. 00 

November 15, 2018

SAFETY

Code

De

fi

 nition

YY

2-Digit Year

MM

2-Digit Month

DD

2-Digit Day

LL

2-Digit Location Code

XXXX

4-Digit Sequential Number

ZZZZZZ

Model #

SAFETY PRECAUTIONS

Improper installation and operation could cause 
personal injury and/or equipment and property damage. 
Read and understand labels and the Owner's Manual 
before installing, operating, or making adjustments.

 WARNING

•  Before working with the equipment, secure all 

loose-

fi

 tting clothing and unrestrained hair.

•  Before operating the sprayer system, verify 

that all safety guards are in place.

•  Always shut vehicle OFF before attempting 

to attach, detach, or service sprayer system.

•  Never attempt to take a unit off a truck with 

liquid in it.

•  Do not climb into or ride on the machine.

 WARNING

Securely bolt and strap unit into place on 
the vehicle bed. Unit must be strapped down 
and bolted into position before operating or 
transporting.

 WARNING

Vehicle handling and characteristics will 
change with the unit installed. Avoid any 
sudden steering maneuvers, starts, or stops 
that could create sloshing and instability.

 WARNING

Always make sure that personnel are clear 
of areas of danger when using equipment. 
Maintain 60' distance from all bystanders 
when operating the sprayer system.

 WARNING

 

Overloading could result in an 

accident or damage. Do not exceed 
GVWR or GAWR ratings as found 
on the driver-side vehicle door 

cornerpost. See Loading section to determine 
maximum volumes of spraying material.

SERIAL NUMBER LABEL

 WARNING

Do not install the control for this product in 
the deployment path of an air bag. Refer to 
vehicle manufacturer's manual for air bag 
deployment area(s).

Summary of Contents for Accuspray VSS-2000

























Reviews: