Lit. No. 86834, Rev. 00
16
November 15, 2018
BEFORE SPRAYING
• Inspect and prepare sprayer before each use as
directed in this manual.
• Do not start sprayer until ready to spray in order to
avoid unintentional spray release.
• Do not spray when wind speed exceeds 4 mph in
order to minimize spray drift.
ADDING BRINE/LIQUID
Fill the tank to the desired level by
fi
lling through
the tank lid. Use the markings on the tank for
volume reference. During operation, if liquid is not
coming out of the tank, check the Maintenance
and Troubleshooting sections of this manual.
SPRAYER OPERATION
1. Be sure that the pump switch is in the "OFF" position.
2. Fill the sprayer with liquid through the port on the
top of the tank.
3. When ready to spray, turn the pump switch to the
"ON" position.
4. When done spraying, be sure to turn the pump
switch to the "OFF" position.
DURING SPRAYING
• Do not eat, drink, smoke, rub your eyes, or touch your
bare skin while handling chemicals and/or spraying.
• Do not spray near open
fl
ames or sources of heat.
• Exercise extra caution when spraying near areas
accessible to children and/or pets.
• Clean up spills immediately per instructions on the
chemical label.
• Turn vehicle OFF and set brake or block wheels,
turn sprayer OFF, and relieve system pressure
before leaving sprayer unattended.
• See Troubleshooting section of this manual before
attempting any repairs. Wear personal protective
equipment and follow safety instructions.
OPERATING INSTRUCTIONS
