background image

4

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • snowdoggplows.com

16062100INST Rev B 

WARNING

• DO NOT under any circumstances disable, remove or relocate any sensors or components related to the operation of the 
air bags.
• Always follow the vehicle manufacturers' recommendations relating to snowplow installation.
• To comply with Federal Regulations and to assure a safe vehicle, the Front Gross Axle Weight Rating (FGAWR), Rear 
Gross Axle Weight Rating (RGAWR), and the Gross Vehicle Weight Rating (GAWR) must not be exceeded at any time.
• Due to the variety of equipment that can be installed on this vehicle, it is necessary to verify that the Front Gross Axle 
Weight Rating (FGAWR), Rear Gross Axle Weight Rating (RGAWR), and the Gross Vehicle Weight Rating (GAWR) are not 
exceeded at any time. This may require weighing the vehicle and adding ballast as necessary. It may also limit payload 
capacity of the vehicle. It is the operator’s responsibility to verify that these ratings are not exceeded.

CAUTION

• Read all instructions prior to assembly
• It is critical that all fasteners be properly torqued for safe plow operation – see chart above.
• Fasteners should be retorqued after 5-8 hours of plow use

FULL ONE-YEAR WARRANTY

Manufacturer will repair, or at manufacturer’s discretion will replace any part of this snowplow which proves to be defec-
tive in workmanship or material under normal use for a period of one year from the date of delivery to the original pur-
chaser. Any cost incurred in returning the product to the supplier is the responsibility of the consumer.

EXCLUSIONS

Manufacturer shall not be liable for special, incidental, or consequential damages, or for damages resulting from lack of 
necessary maintenance, from misuse, abuse, acts of God, or alteration of the product. Some states do not allow the exclu-
sion or limitation of inci¬dental or consequential damages, so the above limita¬tion or exclusion may not apply to you.

Summary of Contents for 16062100

Page 1: ... Tyler Blvd Mentor Ohio 44060 Phone 440 974 8888 Fax 440 974 0165 Toll Free Fax 800 841 8003 snowdoggplows com continued inside SnowDogg Snowplow truck mount installation manual 16062100 GM 99 07 CLASSIC 1500 ...

Page 2: ...0 9 ZN 7 3009979 2 Washer Lock M12 HEL Spring Yellow ZN 8 3006202 20 Screw Hex HD 1 2 13 x 1 1 2 ZN Gr 8 9 3011524 2 Screw Hex HD 1 2 13 x 6 Gr 8 ZN 10 FWL050088011 4 Washer Heavy Helical Spring Lock 1 2 BLK Oxide 11 FWF050138014 2 Washer Flat 500 x 1 38 x 14 ZN 12 3002397 18 Locknut Hex 1 2 13 ZN Gr 8 Parts List ITEM PART NO QTY DESCRIPTION 1 2 3 5 4 6 7 8 10 12 8 9 DRILL Ø9 16 2 PLACES DRILL Ø9 ...

Page 3: ...X HEAD BOLTS and two 2 LOCK WASHERS from the bottom 8 Reinstall front fasteners one 1 13x6 HEX HEAD BOLT with one 1 13 FLAT WASHER and one 1 13 LOCK NUT Also reinstall one 1 M12x40 HEX HEAD BOLT and one 1 M12 LOCKWASHER 9 Repeat steps 2 8 for the DS SIDE MOUNT PLATE 10 Mount the PUSHBAR in place between the two side plates using eight 8 13x1 1 2 HEX HEAD BOLTS and eight 8 13 LOCK NUTS The centerli...

Page 4: ...t as necessary It may also limit payload capacity of the vehicle It is the operator s responsibility to verify that these ratings are not exceeded CAUTION Read all instructions prior to assembly It is critical that all fasteners be properly torqued for safe plow operation see chart above Fasteners should be retorqued after 5 8 hours of plow use FULL ONE YEAR WARRANTY Manufacturer will repair or at...

Reviews: