12
Remove the cable from the parking lever.
13
Remove the plastic fasteners of the parking
brake and wiring.
14
Lift the engine over the engine bracket.
15
Take off the engine bracket assembly with the
shaft and the CVT driven pulley.
16 Insert 4 engine-securing screws with nuts
(1) in the engine bracket. Place the engine
bracket assembly with the reverse gear and
CVT driven pulley on the tracksled. Insert 6
engine bracket-securing screws (2).
1
2
17
Remove the nuts from the engine-securing
bolts and return the engine to its original
place. Insert 2 guide bushings into engine
oblong holes. Place 4 M8 washers on the
engine-securing bolts and put on 4 M8 nuts.
18 Move the engine to set the distance between
the CVT pulleys centers to 265mm.
265
3
