Page 8
8
8
8 of 16
16
16
16
De-authorise a phone number:
Send SMS
：
“PSPACE+AUTHORISED
NUMBER” to delete the authorised number.
Note: This better to add country code ahead of the cell phone number, for example, please send
：
“ADMIN61444333222” to tracker to set 0444 333 222 as an authorised number.
5.7. Single location track
If there is no authorised number, when any number dials up the unit, it will report a Geo-
info;
If there is
already an authorised number, then it will not respond when an unauthorised number calls it up.
5.7.2
When an authorised number dials up the unit, it will hang up and report a real-time Geo-info as
below:
Note: When GPS signal is
weak;
the position of latitude and
longitude included in the SMS is the position that the tracker received
GPS signals at last. If it is different with its exact current location, pay
attention to check the time included in the SMS.
5.8. Auto Track:
Send SMS command “fix0password” to the tracker device, it
will report the Geo-info at 30s intervals for 5 times. (s: second, m:
minute, h: hour). This command setting must be in 3 digits and the
maximum value is 255.
Unlimited times auto track:
Send SMS “FIX030S***N+PASSWORD” to
the tracker device, it will reply the Geo-info continuously at 30 seconds
intervals.
Cancellation:
Send SMS “NOFIX+PASSWORD” to the tracker device.
Note: the interval must not less than 20 seconds.
5.9. Absolute street address
You must set up the APN of your local GSM network for the SIM card in
tracker first before using this function, if there is user name and
password for GPRS login, Please refer to 5.29.1 and 5.29.2 to configure
the APN, user name and password for GPRS login.
After configure the APN, send: “PASSWORD” to device, it
will reply SMS including absolute street address. For example: 89
Epping Road, Macquarie Park, NSW 2113, Australia.
5.10.
GPS drift suppression
Send "spassword" to tracker, it will reply" suppress drift ok".
The GPS data stop updating if vehicle is not moving and latitude and
longitude always keep same, and GPS data updates automatically when
vehicle is moving.
This function is activated as default, send "nospassword" to tracker, it will reply" nosuppress
ok ".
