Fig. L
Corner Loop
Corner Tape
Triangular Reinforcing
Cloth on the Bottom
Vestibule Pole
Vestibule Pole
Vestibule Building Tape
Vestibule Building Buckle
Corner Loop
Duralumin Peg Pin
Plastic Hook
Fly
Ring
Buckle
Ring
Adjusting Tape
14) Slowly insert the Vestibule Pole into the sleeve of the Vestibule Fly, then insert
the pins into both ends of the Pole (fig. L).
15) Connect the six Buckles on the edge of the Fly to the Buckles on the Bottom
Rings. After connecting all of the Buckles, pull the Adjusting Tape to apply
tension and unruffle the Fly (fig. J).
*Do not pull the tape too much: excessive pulling may cause damage to the Fly.
16) Attach the Plastic Hook on the corner of the Vestibule Side Door to the Ring (fig. L).
17) Pull the edges of the Vestibule and Back Room and then insert the Pegs through
the rubber Corner Loops and hammer down (fig. M).
*Do not pull the edges too much, excessive pulling may overload the fastener
and cause damage.
18) After pegging down all the corners, disconnect the Buckle of the Vestibule
Building Tape and store it in the Building Tape Pocket (fig. N).
19) Stretch each tensioning Guy Line and peg it down (fig. O).
20) Pull the Rope tensioner on the Guy Lines to increase the tension (fig. P).
Vestibule
Back Room
Hammer the Peg all the way down.
Building Tape
Pocket
Vestibule
Building Tape
Fig. N
Fig. M
Vestibule
Back Room
Vestibule Side Door
7
