Snow Lizard SLXtreme 7, User Manual

Page: 11 / 15

[ 11 ]
Inserting iPhone 7 into SLXtreme
Case
Important: remove any case or accessory that
may be on or connected to your iPhone 7, including
polyurethane and protective screen films.
These protective films can cause the phone to
become stuck in the case and difficult to remove
from the case.
1. Open the bottom cover of the SLXtreme 7 by
unclasping the latches. Slide the iPhone 7
top first through the bottom of the case.
2. Be sure to check the gasket area of the case
is free of debris before putting the bottom
cover back on.
3. Insert the bottom cover onto the bottom of
the case ensuring that it’s oriented properly
so the lightning connector mates with the
phone.
4. Secure the latches back onto the cover.
Note: When removing the phone from the case, unlatch the
cover, orient the case upright and slowly pull the cover from
the case. The phone will slide out with the cover since it’s
connected to the lightning connector.