Snow Lizard SLXtreme 6, User Manual

Page: 11 / 17

11
INSERTING iPhone 6/6S INTO SLXTREME
CASE
Important:
remove any case or accessory that may
be on or connected to your iPhone 6/6S, including
polyurethane and protective screen films.
These protective films can cause the phone to
become stuck in the case and difficult to remove
from the case.
1. Open the bottom cover of the SLXtreme 6 by
unclasping the latches. Slide the iPhone 6/6S
top
‐
first through the bottom of the case.
2. Be sure to check the gasket area of the case is
free of debris before putting the bottom cover
back on.
3. Seat the bottom cover onto the bottom of the
case ensuring that it’s oriented properly so the
Lightning connector mates with the phone
properly.
4. Secure the latches back onto the cover.
Note:
When removing the phone from the case,
unlatch the cover, orient the case upright and slowly
pull the cover from the case. The phone will slide out
with the cover since it’s connected to the Lightning
connector.