Snow Devil DB7651-26 Manual Download Page 26

25

WARRANTY

ONE

 YEAR WARRANTY

ENGINE WARRANTY

See the ENGINE manual included with this snow thrower for engine warranty information. For all engine 
related warranty issues contact LCT engine corporation - phone 1-877-274-2214. 

WARRANTY

For 

one

 year from date of retail purchase within U.S.A., the manufacturer will, at its option, repair or 

replace, for the original purchaser, free of charge, any part or parts found to be defective in material or 
workmanship. This warranty covers units which have been operated and maintained in accordance with 
the owner's instructions furnished with the unit, and which have not been subject to misuse, abuse, 
commercial use, neglect, accident improper maintenance or alteration.

Personal use: THE FOREGOING PARAGRAPHS CONSTITUTE THE MANUFACTURER'S ENTIRE 
WARRANTY WITH RESPECT TO ANY PRODUCT PURCHASED AND USED FOR PERSONAL 
FAMILY, HOUSEHOLD/RESIDENTIAL PURPOSES, AS DISTINGUISHED FROM COMMERCIAL 
USAGE.

Commercial use: ALL APPLICATIONS OTHER THAN PERSONAL USE AS OUTLINED ABOVE, ARE 
CONSIDERED COMMERCIAL USAGE.

To Obtain Service: Contact the Amerisun customer service department 1-800-791-9458 or e-mail 
[email protected]. Also visit Amerisuninc.com for additional information.

Other Warranties: All other warranties, express or implied, including any implied warranty of 
merchantability is limited in its duration to that set forth in this express limited warranty. The provisions as 
set forth in this warranty provide the sole and exclusive remedy of the manufacturer's obligations arising 
from the sale of its products. The manufacturer will not be liable for incidental or consequential loss or 
damage. Some states do not allow exclusions of incidental or consequential damages, so the above 
exclusions may not apply in all states. This warranty gives you specific legal rights in your state, which 
vary from state to state.

Summary of Contents for DB7651-26



























Reviews: