19
4. Left Side - Loosen the hex nuts attaching the
auger housing to the main frame.
5. Right Side - Remove the hex nuts, lock
washers and flat washers attaching the auger
housing to the main frame.
6. Remove the belt from the drive pulley while
pulling the right side of the auger housing
away from the main frame just enough to
access the belt and auger pulley.
7. Push the auger tension pulley arm to move
the auger brake, away from the belt to allow
removal of the belt.
1 – Auger Brake
8. Remove the auger belt.
Auger Belt Installation
WARNING! Entanglement Hazard - Before
performing any service procedures, make
sure the engine is off and remove the spark
plug wire from the spark plug to ensure the
engine cannot accidently start.
NOTICE: Before installing the auger belt, see
Auger Belt and Related Component
Inspection and repair or replace any
components as required.
