Snorkel TB42J, Operato'S Manual

Page: 27 / 68

Chapter 6 – Controls
TB42J – 0172310 23
Machine/Generator Switch
The switch for the optional AC generator is located on the
front of the upper control panel.
With the engine running, place the switch in the genera-
tor position to provide electrical power to the electrical
outlet at the platform. Place the switch in the machine
position to turn off the generator and resume machine
operation.
Machine functions will not operate while the switch is in
the generator position.
Driving and Platform Work Lights
The control for the optional driving lights is on the back of
each light (refer to Figure 6.8). Place the switch in the on
position to operate the driving lights.
The control for the optional platform work lights is on the
back of each light.
Figure 6.8 – Platform Work Light
High engine speed is obtained when the main boom is
horizontal, the foot switch is depressed, the throttle switch
is in the high position, and the drive joystick is moved out
of neutral into the forward or reverse position.
The machine can be driven in mid-range engine speed
with the throttle switch place in the low position.
Deutz engines have a two speed throttle operation from
the upper controls. When the throttle switch is in the low
position the engine is at idle. Placing the switch in the
high position increases the engine speed to high throttle.
Platform Rotate Switch
The platform rotate switch (refer to Figure 6.6) is used to
rotate the platform relative to the end of the tip boom. The
switch is spring returned to the center off position.
Hold the switch to the right to rotate the turntable coun-
terclockwise. Hold the switch to the left to rotate the turn-
table clockwise.
Horn Button
The optional horn button is on the right side of the upper
control panel. Press the button to sound the horn.
Platform Foot Switch
The upper controls are interlocked through the platform
foot switch (refer to Figure 6.7). Step down on and hold
the platform foot switch to activate the drive and boom
functions from the upper controls.
Figure 6.7 – Platform
Platform Foot
Switch