Snorkel MHP 13/35 Mark II, Maintenance And Repair Parts Manual

Page: 7 / 119

Section A. - General Specifications
The Snorkel MHP13/35 & MHP15/44 Mark II are boom supported elevating work platforms built to conform
to these standards, American Standard ANSI A92.2
Australian Standard AS1418-10(Int) Elevating Work Platforms.
■
General Specifications MHP13/35 Mark II
MHP13/35 & MHP15/44 Mark II – 12785B Rev D page i
SPECIFICATIONS MHP13/35 Mark II
Working height
12.6m 41'
Platform height
10.6m 35'
Rated load
250kg (227kg ANSI) 550lb (500lb ANSI)
Rated load (with rotator)
227kg (200kg ANSI) 500lb (440lb ANSI)
Platform size
1250 x 780 x 1070mm 4.1' x 2.6' x 3.5'
Platform construction
Steel
Platform levelling
Mechanical
Boom type
Articulating
Horizontal reach
5.6m at 6m 18.4' at 19.7'
Maximum wind speed 12.5m/s
45kph 28mph
Turntable rotation
540
O
non-continuous or 360
O
continuous
Power source (std.)
Gasoline engine 5.5hp
Hydraulic system
Proportional electro/hydraulic
Stabilisation
4 independently operated hydraulic outriggers with safety
interlocks
Stabiliser footprint (max.)
3.7 x 3.6m 12.1' x 11.8'
Standard colour
Snorkel orange base and covers, white turret and booms
Transport height
2.05m 6.7'
Overall length
5.99m 19.7'
Overall width - outriggers extended
3.95m 12.1
Overall width - outriggers stowed
1.58m 5.2'
Tyre size (standard)
185 R14
Brakes
Hydraulic disc
Maximum towing speed
80kph 50mph
Maximum rated axle capacity
1750kg 3858lb
Weight (standard model)
1200kg 2645lb
Insulation rating
Nil
Trailer tongue weight (approx)
65kg 143lb