◆
T
he device will beep frequently to remind the
user to synchronize the
time
. This will occurr
when the device is switched on for the first time
,
or
if the power is cut off
completely.
After the
smart phone
is connected to the
device by
W
i
F
i
, op
en t
he
Snooper app
and
the
time from the
smart phone
will
synchronize to the
device automatically.
When upgrading, the blue LED will flash first, then the red LED will begin
to flash. During
this process
do not power off the device or remove the
SD card
.
Hard upgrade method
: You will need a small pointed object, such as a
paper clip or similar. Gently press the paper clip into the
"Upgrade" hole, located above the SD card slot. Whilst pressing the
upgrade button switch on the vehicle ignition
.
In order
to switch on the
device, keep the button pressed until it enters the upgrade mode. The
blue LED will flash first, then the red LED will begin to flash
.
O
nce the
LED starts to flash you can release the upgrade button.
Once the update is complete
,
the device will power off . You
should
delete the upgrade files from the SD card .
Note: if files remain on the SD card, the device will enter upgrade mode
each time it is switched ON.
You can check the firmware version via the app - settings >
miscellaneous.
Notice
35
DVR-PRo V1.0 EN 03/19
