1. Firstly, decide the optimum
position for
the unit,
ensuring that
it des not obscure the drivers view.
The best position is
usually in the
center of
the windscreen at the
top
,
Button
and
Indicator
light
definitions
Power
button:
press and hold
to
turn
on
.
Quick
press
to
take
a
photo
graph
.
P
ress
and hold
to
lock
/
unlock
the
current
video
file
when
you
boot
up.
Reset
button:
p
ress
'r
eset
'
to
restart
the
device
.
Upgrade
button:
This
button
does
not
need
to
be
operated
when
the
device
is
working
normally
. P
ress
the
upgrade
button
until
the unit enters
the
upgrade
mode
(indicator
LED
flashes)
then release it. The button
located above the SD card slot
.
Status LED function.
Blue is flashing and the Red LED is solid – The device is switched On and it is
recording.
Blue and RED LEDs flashing rapidly – The device has registered an event (G-
sensor) or the emergency record button has been pressed. The LEDs will
continue to flash rapidly until the event recording has ended.
Blue LED lit and Red LED flashing – the unit is switched On, but the SD card
is not inserted in to the device or the SD card
requires attention.
Blue and Red LEDs are both Off – the device is Off or in parking mode, if the
device is activa
ted whilst in parking mode the Blue and Red LEDs will flash
rapidly.
Installing the front camera
.
12
DVR-PRo V1.0 EN 03/19
