4.
Secure the D
A
B2000 module with the suppl
i
ed hook & loop tape an
d
screws. Please refer to the section on
Securing the DAB2000 module,
Step by Step
later in this user guide for further information.
5.
Install the supplied DAB antenna; please refer to
Antenna Installation
Guide
later in this user guide for installation instructions.
ATTENTION
1.
We have fully tested the supplied DAB antenna to work wi
t
h
DAB2000. If you replace it with a third party DAB antenna,
the performance may suffer.
2.
For DAB2000 to work wi
t
h the supplied active antenna, the
antenna power must be set to ON. DAB2000 can al
s
o work
with a passi
v
e antenna; the antenna power must be set to
OFF. If you replace the supplied antenna with any third party
antenna, you must set the antenna power to OFF.
3.
If you need to d
i
sconnect/connect the antenna from the
DAB2000, please unplug the DAB2000 from the vehicle power
adaptor first, to avoid possible damage to the antenna.
4.
Damage resulting from the incorrect installation of the
antenna is not covered by the warranty.
5.
Consult a pr
o
fessional installer if you have any issues o
r
concerns with the installation.
