To set the auxiliary input mode
The DAB2000 provides the capability to play audio devices such as MP3 or
iPod® etc. through your vehicle radio.
1.
Press the
MODE
button until the screen di
s
plays
《
AUX
》
. Press the
Rotary Knob
to confirm your selection. Alternatively, after 3 s
e
conds,
the DAB2000 will swi tch to the auxiliary input mode and you can star
t
listening to the audio device.
Note:
You must co
n
nect your audi
o
cable between the Aux-In jack of
DAB2000 and the audio device.
While in the auxiliary input mode, you must press the
MODE
button
and select one of the D
A
B preset modes to return to listen
in
g to a DAB
station.
To recall the last listened to DAB station
The DAB2000 automatically remembers the l
a
st DAB station that you were
listening to. This allows you to go back to the DAB station you were listening
to quickly; even
if
it is not in the memory preset list.
1.
Press the
Last Station
button to recall the station that was most recently
listened to. The screen wi ll show
《
LS EMPTY
》
if the last listened to
station has not been memorized yet or
《
station name
》
if it has.
2.
Press the
Rotary Knob
to confirm your selection. Alternatively, after 3
seconds, the DAB2000 will switch to the l
a
st listened to station
automatically.
To display the current FM transmitting frequency
1.
Press the
FM
button, and the screen will show
《
Frequency
》
where
Frequency
is the current FM transmitting frequency.
To set the FM transmitting frequency
You can set DAB2000 to either AFC or auto scan mode (refer to sections,
To
enable AFC
and
To enable auto scan for further information
) to change the
FM transmitting frequency. However, if you wish to change the setting and use
your own selected FM transmitting frequency manuall
y
, please follow the
steps in this section or in the sections
To save a desired FM transmitting
frequency in memory
,
and
To recall FM transmitting frequency saved
in memory
to change the FM transmitting frequency manually.
