Check that the power supply cord is not damaged, or pinched or kinked between the ice maker and the cabinet.
Check that the water supply line is not damaged, or pinched or kinked between the ice maker and the cabinet.
Check that the drain line (on some models) is not damaged, or pinched or kinked between the ice maker and the cabinet.
Choose a location where the floor is even. It is important for the ice maker to be level in order to work properly. If needed, you
can adjust the height of the ice maker by changing the height of the leveling legs.
At Snooker’s our policy includes a continuous commitment to improve our products,
we reserve the right to change materials and specifications without notice.
DRAIN
CONNECTION
GRAVITY DRAIN SYSTEM
Connect the ice maker drain to your drain in accordance with all state and local codes and ordinances. If the ice maker is provided
with a gravity drain system, follow these guidelines when installing drain lines. This will help keep water from flowing back into
the ice maker storage bin and potentially flowing onto the floor, causing water damage.
Drain lines must have a minimum of
5⁄8"
(
15.88 mm
) inside diameter.
Drain lines must have a
1"
drop per
48"
(
2.54 cm
drop per
122 cm
) of run or
1⁄4"
drop per
12"
(
6.35 mm
per
30.48 cm
) of
run and must not have low points where water can settle.
The floor drains must be large enough to accommodate drainage from all drains.
The ideal installation has a standpipe with a
1 1⁄2"
(
3.81 cm
) to
2"
(
5.08 cm
) PVC drain reducer installed directly below the
outlet of the drain tube as shown. You must maintain a
1"
(
2.54 cm
) air gap between the drain hose and the standpipe.
NOTES
If the drain hose becomes twisted and water cannot drain, your ice maker will not work.
A drain pump is necessary when a floor drain is not available.
IMPORTANT
Maximum rise
10 ft
(
3.1 m
)
Maximum run
100 ft
(
30.5 m
)
Plumbing Code and any local codes and ordinances.
The drain pump discharge line must terminate at an open sited drain.
IMPORTANT