Snom M45R SC Quick Installation Manual Download Page 19

19

Maintenance

Taking care of your telephone

•  Your base station and cordless handset contain sophisticated 

electronic parts, so you must treat them with care.

•  Avoid rough treatment.
•  Place the handset down gently.
•  Save the original packing materials to protect your products if you 

ever need to ship them.

Avoid water

•  You can damage your cordless telephone if it gets wet. Do not use 

the handset in the rain, or handle it with wet hands. Do not install 

the base station and handset near a sink, bathtub or shower.

Electrical storms

•  Electrical storms can sometimes cause power surges harmful to 

electronic equipment. For your own safety, take caution when using 

electric appliances during storms.

Cleaning your telephone

•  Your products have a durable plastic casing that should retain 

its luster for many years. Clean it only with a soft cloth slightly 

dampened with water or a mild soap.

•  Do not use excess water or cleaning solvents of any kind.

Remember that electrical appliances can cause serious injury if 

used when you are wet or standing in water. If the telephone base 

should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG 

THE POWER CORD FROM THE WALL, then pull the unit out by the 

unplugged cord.

DRAFT

Summary of Contents for M45R SC























Reviews: