After successful setup, the new Snom Phone should now be available under "
", and can be configured there at any time.
Telephony Devices
3.2 Step by step guide - Snom DECT base:
With the setup of the Fritzbox most of the setup is done. Now you only have to set up the DECT base.
Pairing handsets
First you should pair the handsets with the base as described in the
description. How this works can be found here in the manual on
M215 - SC
page 25.
Rename Handset
In order to better distinguish the handsets from each other, it is possible to change the name. This name will be shown on the display of the handset.
To do so, navigate in the web interface of the M215-SC to the menu item "
" and then to "
".
System
Handset Name
Please check in advance that your phone has the
Enter Snom Webinterface
Since automatic provisioning is not supported by the Fritzbox, the Snom DECT base must be set up via your web user interface (WUI).
To access the base, enter the IP address of your phone in your Internet browser (e.g.
address of your base is described in the following article:
Entering Web Interface - WUI of your Snom DECT-M-SC Series Base
