ENGLISH - 9
The DiSEqC function is not activated when the antenna is in the home position.
After moving the antenna to another position, press the SET button to activate
the DiSEqC function.
NOTE
A. DiSEqC setting
After use and before travelling, the antenna has to be sent to HOME manually
B. Manual
Refer SNIPE BT Grey Line’s pre-satellites for DiSEqC 1.1 when user setup at STB
a.
b.
After use and before travelling, press HOME button to return the antenna back to HOME position and
the unit is automatically turned off in 30 seconds
HOME LED blinks during HOME positioning and becomes solid when the antenna is at HOME
For example :
1
2
3
4
5
6
7
8
9
10
11
12
LNB 1
LNB 2
LNB 3
LNB 4
LNB 5
LNB 6
LNB 7
LNB 8
LNB 9
LNB 10
LNB 11
LNB 12
ASTRA 1
HOTBIRD
ASTRA 3
ASTRA 2
EUTELSAT 5W
THOR
ASTRA 4
HISPASAT
TURKSAT
EUTELSAT 9
USER1
USER2
NO
LNB
Satellite
4-3. Special function
a. Default setting for DiSEqC is OFF, DiSEqC LED is off
b.
c.
To switch the function ON/OFF, make sure that antenna is at HOME and press DiSEqC button for
DiSEqC can be executed after pressing 2 seconds (See also DiSEqC LED status changes between ON
and OFF)
For DiSEqC operating, user needs to assign DiSEqC satellites list at STB is in same order as above SNIPE
BT Grey Line’s pre-set list
DiSEqC On(
●
) / Off(
○
)
