11
Bi-Wiring and Bi-Amping (All Models)
Bi-Wiring
1.
Use equal lengths of the appropriate wire when
bi-wiring each speaker. Consult your dealer for cable
options.
2.
Unscrew both sets of terminals and remove the
jumper straps.
Bi-Amplifying
Using one amplifi er for the bass, and one for the high
end:
1.
Unscrew both sets of terminals and remove the
jumper straps.
2.
Connect the cables from the bottom set of termi-
nals to the low-frequency amplifi er driving the bass
units.
3.
Connect the cables from the top set of terminals to
the highfrequency amplifi er driving the tweeters.
4.
Do not use an external crossover. It will interfere
with the phase and frequency response.
Using One Amplifi er for Each Speaker
Make sure that the amplifi ers are identical.
1.
Unscrew both sets of terminals and remove the
jumper straps.
2.
Connect the cables from the bottom set of terminals
to the fi rst amplifi er’s right channel.
3.
Connect the cables from the top set of terminals to
the fi rst amplifi er’s left channel.
4.
Repeat steps 2 and 3 above for the second amplifi er.
XA 75LE
amplifier or receiver
left speaker
right speaker
low-frequency amplifier
high-frequency amplifier
left speaker
right speaker
right channel amplifier
left channel amplifier
